Chrysler 2015 Town & Country Owner'S Manual Download Page 158

Page: 158 / 726

NOTE:

The Uconnect® Phone requires a mobile phone

equipped with the Bluetooth® “Hands-Free Profile,”

Version 0.96 or higher. See the Uconnect® website for

supported phones.
For Uconnect® customer support:

•

U.S. residents - visit UconnectPhone.com or call

1-877-855-8400.

•

Canadian Residents - visit UconnectPhone.com or

call, 1-800-465-2001 (English) or 1-800-387-9983

(French).

Uconnect® Phone allows you to transfer calls between

the system and your mobile phone as you enter or exit

your vehicle and enables you to mute the system’s

microphone for private conversation.
The Uconnect® Phone is driven through your

Bluetooth® “Hands-Free Profile” mobile phone.

Uconnect® features Bluetooth® technology - the global

standard that enables different electronic devices to con-

nect to each other without wires or a docking station.

Uconnect® Phone operates no matter where you stow

your mobile phone (be it your purse, pocket, or brief-

case), as long as your phone is turned on and has been

paired to the vehicle’s Uconnect® Phone. The Uconnect®

Phone allows up to seven mobile phones to be linked to

the system. Only one linked (or paired) mobile phone can

be used with the system at a time. The system is available

in English, Spanish, or French languages.

WARNING!

Any voice commanded system should be used only

in safe driving conditions following all applicable

laws, including laws regarding phone use. Your at-

tention should be focused on safely operating the

vehicle. Failure to do so may result in a collision

causing serious injury or death.

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands