Chrysler 2015 Town & Country Owner'S Manual Download Page 309

Page: 309 / 726

LOAD LEVELING SYSTEM — IF EQUIPPED

The automatic load leveling system will provide a level-

riding vehicle under most passenger and cargo loading

conditions.
A hydraulic pump contained within the shock absorbers

raises the rear of the vehicle to the correct height. It takes

approximately 1 mile (1.6 km) of driving for the leveling

to complete depending on road surface conditions.
If the leveled vehicle is not moved for approximately 15

hours, the leveling system will bleed itself down. The

vehicle must be driven to reset the system.

ROOF LUGGAGE RACK — IF EQUIPPED

The crossbars on your vehicle are delivered stowed

within the roof rack side rails. If adding cargo, deploy the

crossbars. Distribute cargo weight evenly on the roof rack

crossbars, to maximum of 150 lbs (68 kg). The roof rack

does not increase the total load carrying capacity of the

vehicle. Be sure the total load of cargo inside the vehicle

plus that on the external rack does not exceed the

maximum vehicle load capacity.

Crossbar Stowed In Side Rail

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 307

Summary of Contents for 2015 Town & Country























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands

Chrysler 2015 Town & Country, Owner'S Manual

Search results

Summary of Contents for 2015 Town & Country

Reviews:

Related manuals for 2015 Town & Country

Brands by name

Popular brands