background image

iBoard

 

®

 

 

Customer Support: [email protected] 

 

Rev. 20220601

 

iBoard

® 

by APS

 

PART#: IB-R159/R258 

READ INSTRUCTIONS CAREFULLY BEFORE START ING 
INSTALLATION. REMOVE CONTENTS FROM BOX AND 
VERIFY ALL PARTS ARE PRESENT. ASSISTANCE IS 
RECOMMENDED. 

*ROCKER PANEL MOUNT 
*NO DRILLING REQUIRED 

Fastener Size  Tightening Torque (ft-lbs) 

Required 

6mm 

6-7 

 

8mm 

16-18 

 

10mm 

31-32 

12mm 

56-58 

14mm 

92-94 

Driver

 

Passenger

 

Front 

1#

 

1#

 

1#

 

1#

 

1#

 

1#

 

NOTE: All Mounting Brackets are universal. 

Summary of Contents for iBoard IB-R159

Page 1: ...START ING INSTALLATION REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT ASSISTANCE IS RECOMMENDED ROCKER PANEL MOUNT NO DRILLING REQUIRED Fastener Size Tightening Torque ft lbs Required 6mm 6 7 8mm 16 18 10mm 31 32 X 12mm 56 58 X 14mm 92 94 X Driver Passenger Front 1 1 1 1 1 1 NOTE All Mounting Brackets are universal ...

Page 2: ...n Item QTY Description Item QTY Description 1 6 Mounting Brackets 3 18 M8X1 25 Nylon Lock Nuts 2 18 M8 Large Flat Washers 2 3 2 1 3 Hardware Package B For Step Bar Installation Item QTY Description Item QTY Description 1 12 M6X1 20mm Square Head Bolts 3 12 M6 Nylon Lock Nuts 2 12 M6 Large Flat Washers ...

Page 3: ...nt Mounting Bracket Location with 3 M8 Large Flat Washers and 3 M8X1 25 Ny lon Lock Nuts Fig 2 Do not fully tighten the hardware at this time NOTE All 6 Mounting Brackets are universal Fig 2 Driver Side Front Mounting Bracket Installation Remove paint on the thread ed studs if equipped Move to Driver side Center and Rear mounting locations Figs 3 4 Repeat Steps 1 2 to install Driver Center Mountin...

Page 4: ...ce of the board will be damaged M6X1 20mm Square Head Bolts Fig 5 Slip M6X1 20mm Square Head Bolts Into The Bottom Channels Fig 6 Running Board Installed Onto Mounting Bracket 2 M6X1 20mm Square Head Bolts 2 M6 Large Flat Washers 2 M6X1 Nylon Lock Nuts STEP 5 Level and adjust the Running Board and fully tighten all hard ware Important Please follow the recommended Tightening Tor ques shown in the ...

Reviews: