![background image](http://html1.mh-extra.com/html/zeiss/elyra-7/elyra-7_operating-manual_3332235080.webp)
ZEISS
Left Tool Area and Hardware Control Tools
ELYRA 7
76
000000-2262-999
03/2019 V_02
5.2.5.7
HAL Control
When the
HAL On/Off
button (available for
WF
,
SIM Apotome
and
Lattice
SIM
and
Laser WF
imaging modes) for transmitted light of the
halogen lamp is pressed, the control panel for the
light settings is displayed (Fig. 96).
If you press the
On
button, the light intensity of
the
HAL
lamp can be varied via the input box or
slider. The light path will be highlighted by color in
the diagram. Press the
On
button again to shut
down the light.
5.2.5.8
Epi Illumination Control
When the
Reflected Light On/Off
button (only
available for
WF
imaging mode) for reflected light
of the lamp is pressed, the control panel for the
light settings is displayed (for software controlled
lamps only) (Fig. 97).
If you press the
On
button, the light intensity of
the lamp can be varied via the input box or slider.
The light path will be highlighted by color in the
diagram. Press the
On
button again to shut down
the light.
5.2.5.9
Aperture Control
When the
Aperture
button (available for
WF
, SIM
Apotome, Lattice
SIM
and
Laser WF
imaging
modes) is pressed, the aperture size of the
motorized condenser can be defined by typing or
by using the slider or arrowheads (Fig. 98).
The
Filter
pull down menu allows to select the
filter (available only in WF imaging mode) suitable
for the objective in use.
Fig. 96
HAL control
Fig. 97
X-Cite or HXP control panel
Fig. 98
Aperture control panel