ZEISS
Left Tool Area and Hardware Control Tools
ELYRA 7
122
000000-2262-999
03/2019 V_02
When highlighting a ROI in the list, the numerical
parameters for
Center X
,
Center Y
,
Width
and
Height
in pixels will be shown in
Region feature
field. In addition the ROI will be set to active in the
image.
Note, when a SMLM (
HR
) image is displayed
numbers will refer to the SMLM image and
not the
SWF
image, which normally do have
different pixel resolutions.
It is possible to change the
Line width
from the
Line width drop down menu (Fig. 190).
The
Color
of the outline of a ROI can be changed
in the
Color
drop down menu (Fig. 191). The scroll
bar gives access to all available colors.
Color selection is only possible if either
Individual
colors
or
Common Color
is chosen in the drop
down list of the
Color mode
.
The
Color mode
drop down menu allows defining
how colors will be assigned to the outline of a
region (Fig. 192).
Individual colors
allow the
assignment of different colors to different regions.
If
Automatic Assignment
is chosen in the
Color
mode
a color will be automatically assigned to
each region as it comes.
The choice of Color is inactive in this mode.
Common Color
assigns the same color to all
regions.
The
Creation Mode
drop down menu offers three
different settings for defining ROIs (Fig. 192).
Switch to selection mode
activates the arrow
tool once the region is drawn in the image.
Multiple elements
allow drawing multiple
regions of the same type in a sequence.
One
element only
restricts the number of ROIs to be
drawn in the image to one. Any new region
deletes the previous one.
The function
Fit frame size to bounding
rectangle of regions
will be ignored.
Fig. 190
Line width drop down menu
Fig. 191
Color drop down menu
Fig. 192
Color mode drop down menu