ELYRA 7
Startup and Shutdown of the System
ZEISS
03/2019 V_02
000000-2262-999
21
−
Start System
for system control, data / image
acquisition / recording and analysis. The whole
microscope system will be initialized. The progress of
the boot process will be displayed by the blue time
tab. During booting the status of the system will be
displayed in the
Boot Status
window and the single
components will be listed which have been or are
currently being checked during the boot process
(Fig. 11).
−
Offline/Demo
for data analysis and simulation.
Offline/Demo
reads the active hardware database
and simulates the respective hardware. This button is
only available after opening the
Boot Status
display
by clicking the little arrow left of the text "Boot
Status" This option should be chosen when working
at an offline station and if you want to test
functionalities of the system. The progress of the boot
process will be displayed by the blue time tab. The
single components will be listed, which are checked
during the boot process. Note that the software will
not control the hardware in this mode.
−
Image Processing
for data analysis only. This mode
ignores the hardware and activates only data handling
and image processing functionality to analyze stored
images. Note that only those software tools will be
displayed that are needed for processing and analysis
of the data. No hardware control tools will be shown.
−
Cancel
to abort the booting process and to leave the
dialog. Note that the
Cancel
button will appear in the
place of the
Image processing
button only if
Start
System
or
Offline/Demo
was selected (Fig. 12).
−
You can leave the software by choosing the
File
menu from the main tool area and selecting
Exit
.
−
You can select a database before booting, if you wish
to change the current one. To change the database
open the
Hardware configuration database
expansion field (Fig. 13). The expansion field displays
the currently loaded database and its location on the
hard disc.
Fig. 11 Starting the ZEN software – The
Login "ZEN" dialog with Boot
Status field expanded
Fig. 12 Starting the ZEN software – The
Login "ZEN" dialog with Boot
Status field expanded and
during the process of booting
Fig. 13 Hardware configuration
database - The Login "ZEN"
dialog allows you to boot the
Software in different modes. If
the Boot Status is closed, the
options are Start System and
Image Processing.