CHAPTER 3 - ADDITIONAL SOFTWARE TOOLS
ZEISS
System Maintenance Tool
ELYRA 7
4
000000-2262-999
03/2019 V_02
•
After start, choose
Log in… Customer
(type-in any name)
not available.
The Maintenance Tool can only be used, if the calibration objective is entered as
APO Calibration LSM
. If
this is not the case, a message will remind the user to select the calibration objective.
Fig. 4
Boot status of the Maintenance Tool
Fig. 5
Log in window
Fig. 6
Selection of the calibration objective