Splicecom 4100 Скачать руководство пользователя страница 220

Страница: 220 / 374

Installation and Maintenance Manual

Working with Voicemail

216

Installation and Maintenance Manual v4/0615/10

If the Call Server entered above is to support Music on Hold tick Music Server. (Please refer to the

Configuring Music Channels from page 203 for further information.)

If the Call Server entered above is to support Department announcements tick Queue Message

Server. (Please refer to the Voicemail for a Department section from page 233 for further

information.)

If the Call Server entered above is to support call recording tick Recording Server. (Please refer to

the Call Recording section from page 256 for further information.)

If the Call Server entered above is to support the conferencing feature tick Conference Server.

(Please refer to the Conferencing section from page 172 for further information.)

Select Update or Apply when ready.

Configure any other facility required on this port

–

details of which are covered in the relevant

section of this manual.

Centralising a voicemail service

Where a system consists of multiple Call Servers and a voicemail service is to be centralised on a specific

Call Server an additional Voicemail Port(s) can be created to specify where to route the request to. This

service must be unticked in the BuiltIn Voicemail Port for the Call Server(s) no longer hosting the service.

The system will always look in the BuiltIn Voicemail Port for the Call Server receiving the request, and if

the service required is not enabled it will look for the Call Server entered in another Voicemail Port. The

Builtin Voicemail Port for the Call Server providing the centralised service must be configured with the

necessary number of channels required for this service via the Capacity field.

In Manager select Voicemail Ports

Select the Add button

Enter a Name for the Voicemail Port, using alpha-numeric characters only, begin with a letter and

do not use any punctuation. This port must not be called BuiltIn.

Enter a Description if required.

Select Apply

Select the Call Server field.

From the Select Call Server list select the Call Server that will be no longer providing the relevant

voicemail service. This entry will be displayed in the Call Server field.

Select the Remote Call Server field.

From the Select Call Server list select the Call Server that will be hosting the relevant voicemail

service. This entry will be displayed in the Remote Call Server field.

Tick the service(s), eg Conference Server, for which requests are to be sent to the Remote Call

Server.

Ensure this service is unticked in the BuiltIn Voicemail Port for the Call Server configured above and

ensure this service is ticked in the Builtin Voicemail Port for the Remote Call Server configured

above.

Select Update or Apply when ready.

Voicemail for a User

Enabling Voicemail for a User

In order to provide a User with voicemail functionality a Message Box Licence must be assigned to that

User.

In Manager select Users

From the Users list select the User required

Содержание 4100























































































































































































































































































































































































Результаты поиска

Содержание 4100

Отзывы:

Похожие инструкции для 4100

Бренды по названию

Популярные бренды

Splicecom 4100, Инструкция по установке и обслуживанию

Результаты поиска

Содержание 4100

Отзывы:

Похожие инструкции для 4100

Бренды по названию

Популярные бренды