Installation and Maintenance Manual
System Configuration
Installation and Maintenance Manual v4/0615/10
71
4
You will be taken to the port assigned to this User
5
In the Partner Login Code field enter a 1-8 digit access code, eg 1234
6
Select Update or Apply when ready.
Run the PCS 60 as a partner
1
Run the PCS60.exe file either from the Installation folder, eg C:\Program Files\SpliceCom\PCS60, or
create a short cut to this file in the required location and double click on the short cut. (Please
note that if you do not wish the PCS 60 to be loaded initially as an IP soft phone disconnect the PC
from the network or turn off Auto Add Phones.)
2
The PCS 60 application will open.
3
From the File menu select Preferences
4
In the IP Address field enter the IP address of the Call
Server or Phone Module or IP Phone as described
above, eg 192.168.0.249
5
In the Port field enter the port number that the
analogue phone is connected to, as described
above, or 5001 for an IP phone.
6
In the Partner Login Code field enter the phone’s
Partner Login Code configured above.
7
Select OK when ready
8
Close down the PCS 60.
9
At this point your PC will need a network connection to the maximiser system.
10
Run the PCS 60 again.
11
Once a connection has been made the name of User assigned to the port that the PCS 60 is
partnering is displayed in the Status Bar at the bottom left hand corner.
