Installation and Maintenance Manual
Configuring system functionality
Installation and Maintenance Manual v4/0615/10
91
None
–
this port will be used as a standard extension with an analogue phone.
Paging
–
this port will be used by an external paging source, for example, a tannoy or PA system. A
Paging Port Adapter is required to connect the powered speakers (please refer to the maximiser
Technical Reference manual for the specifications for this adapter.). This port can be paged via a Dial
Plan entry, an example of which is available on page 136. Alternatively, voicemail can be used play a
message over this port as described on page 233.
MusicOnHold
–
this port will be used to provide Music On Hold from an external source. Please refer to
page 203 for further details.
Extension Anywhere
For information on the Extension Anywhere and Remote Idle fields please refer to the Setting up
Extension Anywhere section from page 126.
Fax Server Support
1
Configure the Caller Display Type on the analogue extension port connected to the Fax Server to
“FaxServer”.
2
Create a new Group and add the User assigned to the above port. (Please refer to page 138 for
information on creating a Group.)
3
Create a new Department and in the Distribution Group add the Group created above. (Please
refer to page 146 for information on creating a Department.)
4
Create a DDI Call Plan entry routed to this Department. (Please refer to page 195 for information
on creating a DDI Call Plan.)
Configuring an IP Phone
1
In Manager select Phones
2
Select the module that the PCS 60 IP Phone, PCS 50 IP Phone, PCS 100, 400, 410, 55x, 56x, 57x, 58x
or IP phone is connected to, eg Call Server
3
The MAC Address of the unit will identify the specific phone or PC
4
Select this entry if configuration is required.
