Installation and Maintenance Manual
Configuring system functionality
Installation and Maintenance Manual v4/0615/10
201
5
Select the Add LCR Plan Entry button
6
If this entry is only to be active during certain hours enter the relevant Time Plan (see page 169 for
further information).
7
Select Apply if a change has been made to the Time Plan field
8
In the Number Match field enter the number to be dialled by eg the User
9
From the Action list box select the Action required (please refer to page 326 for a full list of the
functions of each Action)
10
In the Dial field enter the number to be dialled by the system, and/or
a
If all the digits entered, by eg the User, are to be used enter
%n
b
If the digits entered minus the numbers in the Number Match field are to be used enter
%r
c
To use the User’s e
xtension number enter %e
11
In the DTMF field enter the digits to be dialled once a connection has been made. This may be a
pass code required by the carrier. A pause may be required either before or after the pass code in
which case insert a D either before and/or after the code digits.
12
Select Apply
13
Select the Trunk Group field and select the Trunk Group that calls via this LCR Plan entry will use
(see page 182 for further details).
14
If required repeat steps 9 to 13 using the Action Secondary field, Dial Secondary field, DTMF
Secondary field, secondary Trunk Group field. The Secondary entries will be used if the primary
entries fail.
15
Select Update when ready.
16
Repeat steps 5-15 to enter further LCR Plan entries if required.
17
Select Update or Apply when ready.
18
This new LCR Plan can now be assigned to a Dial Plan entry
Alternatively, amend the default Standard LCR Plan and follow steps 5 to 17.
An understanding of the Working with Dial Plans section from page 130 will help with the completion of
LCR Plan entries. It is recommended that Dial Plans are used for internal dialling and LCR Plans are used
for external calls (including call barring).
Examples
This diagram gives an example of a default LCR
Plan entry which will route external calls to any
available Trunk.
