Splicecom 4100 Скачать руководство пользователя страница 330

Страница: 330 / 374

Installation and Maintenance Manual

Field Descriptions

326

Installation and Maintenance Manual v4/0615/10

Call Server

The entry when dialled via this Call Server will have priority over an entry where the Call Server has not

been specified.

Number Match

64 Characters. Digits to be matched with the digits dialled by the User. A left hand matching string.

Action

The action to be performed.

Busy

–

the busy tone will be presented

Call Waiting Disable

–

set the Call Waiting field to “Disable” for the User whose User Name or extension

number has been entered in the Translate To field. If the Translate To field is blank this Action will be

activated for the User on whose extension the short code was dialled.

Call Waiting Enable

–

set the Call Waiting field to “Enable” for the User whose User Name or extension

number has been entered in the Translate To field. If the Translate To field is blank this Action will be

activated for the User on whose extension the short code was dialled.

Call Waiting Phone Tools

–

set the Call Waiting field to “PhoneTools” for the User whose User Name or

extension number has been entered in the Translate To field. If the Translate To field is blank this Action

will be activated for the User on whose extension the short code was dialled.

Cancel All Forwarding

–

turn off the Forward on Busy option and the Forward On No Answer option and

set the Forward/Follow Me field to None for the User whose User Name or extension number has been

entered in the Translate To field. If the Translate To field is blank this Action will be activated for the User

on whose extension the short code was dialled.

Conference

–

create a 3-way conference with the number (internal or external) entered in the Translate

To field.

Dial

–

dial the digits entered in the Translate To field

Dial Account

–

make a call using the account code and telephone number entered in the Translate To

field. The Translate To field must contain the account code*telephone number, eg 1234*01923289398.

Therefore where the Number Match field of a Dial Plan entry contains eg *95 and the Translate To field

contains %r the User must dial *951234*01923289398, for example.

Dial Auto Answer

–

forces calls made to an IP extension to be automatically answered. For use with

PCS 58x/57x/56x/55x, PCS 410/400, PCS 100, PCS 60 (IP phone) PCS 50 (IP phone) & PCS Operators Console

(IP phone) only.

Dial Auto Conference

–

join the call taking place on the number (internal or external) entered in the

Translate To field to create a 3-way conference.

(Commonly known as “barge”)

Dial Auto Listen

–

silently monitor the extension number entered in the Translate To field. Provides listen-

only Call Monitor/Eavesdrop facilities to Managers, Administrators and Supervisors.

Dial Emergency

–

allows an external call to be made when Outgoing Call Bar is set. Calls made via this

Action will be displayed in the Warnings screen.

Содержание 4100























































































































































































































































































































































































Результаты поиска

Содержание 4100

Отзывы:

Splicecom 4100, Инструкция по установке и обслуживанию, Страница: 330 / 374

Результаты поиска

Содержание 4100

Отзывы: