Splicecom 4100 Скачать руководство пользователя страница 217

Страница: 217 / 374

Installation and Maintenance Manual

Working with Voicemail

Installation and Maintenance Manual v4/0615/10

213

Configuring the default Voicemail Port

Each system will have one Voicemail Port called BuiltIn which will control voicemail for the entire system

by default. This port can be configured as follows:

In Manager select Voicemail Ports

Open the BuiltIn entry

Do not change the Name

The Description can be changed to any text required.

Select Apply to save the change if relevant

Call Server field

if this port is to control the voicemail for the entire system leave this field blank, or

if the system consists of multiple Call Servers and different services are required on different

Call Servers, or Vision is running on this system (even if there is only one Call Server), or if

voicemail is being run from an external server (even if there is only one Call Server), specify

the Call Server that is using this port as follows:

Select the Call Server field.

From the Select Call Server list select the Call Server providing the voicemail service. This

entry will be displayed in the Call Server field.

Dial Plan field

–

the Dial Plan selected here will determine how digits dialled by the voicemail

server are handled. This is required when using Auto Attendant, Call Back, Ring back when free

and Assistant Telephone functionality.

Select the Dial Plan field

From the Select Dial Plan list select the Dial Plan required. This entry will be displayed within

the Dial Plan field.

Capacity field

–

enter the number of channels to be assigned to this port. This will be the

maximum number of simultaneous connections that will be allowed via this port. The relevant

number of VoicemailPort licences must have been previously installed and be available.

The following services are enabled on this port by default, disable these if they are not required, eg

disable all of these if these services are being hosted by an external voicemail server.

Voicemail Server

–

demines whether the Call Server configured above is to provide voicemail

functionality.

Auto Attendant Server

–

determines whether the Call Server configured above is to support

Auto Attendant functionality. (Please refer to the Creating an Auto Attendant section from

page 246 for further information.)

Music Server

–

determines whether the Call Server configured above is to support Music on

Hold. (Please refer to the Configuring Music Channels from page 203 for further information.)

Queue Message Server

–

determines whether the Call Server configured above is to support

Department announcements. (Please refer to the Voicemail for a Department section from

page 233 for further information.)

Recording Server

–

determines whether the Call Server configured above is to support call

recording. (Please refer to the Call Recording section from page 256 for further information.)

Conference Server

–

determines whether the Call Server configured above is to support the

conferencing feature. (Please refer to the Conferencing section from page 172 for further

information.)

Configure any other facility required on this port

–

details of which are covered in the relevant

section of this manual.

Select Update or Apply when ready.

Содержание 4100























































































































































































































































































































































































Результаты поиска

Содержание 4100

Отзывы:

Бренды по названию

Популярные бренды

Splicecom 4100, Инструкция по установке и обслуживанию

Результаты поиска

Содержание 4100

Отзывы:

Бренды по названию

Популярные бренды