manualshive.com logo in svg

LeCroy DDA 7 Zi series, Руководство оператора

Операторская инструкция для серии LeCroy DDA 7 Zi доступна для бесплатного скачивания на manualshive.com. Узнайте все возможности этого продукта, ознакомившись с подробным руководством по эксплуатации. Скачайте его сейчас и овладейте всеми функциями этой удивительной серии осциллографов LeCroy.

Поделиться
Скачать
background image

WavePro 7Zi 

485

WP700Zi-OM-E-RevA

Description 

All local features between the parameter cursors for an input waveform are identified. The 
peak-to-trough amplitude is determined for each feature, and the average is returned as taa. 
Provided for histograms is the peak-to-trough amplitude for each local feature between the 
parameter cursors. 

Parameter 
Settings

Selecting this parameter displays a hysteresis-dialog for setting the hysteresis value to a 
specified number of vertical divisions. 

taa- Track 

Average 

Amplitude- 

Definition 

The average local baseline-to-trough amplitude for all local features. 

Description 

All local features between the parameter cursors for an input waveform are identified. The local 
baseline-to-trough amplitude is determined for each feature, and the average is returned as 
taa. Provided for histograms is the local baseline-to-trough amplitude for each local feature 
between the parameter cursors. 

Parameter 
Settings

Selecting this parameter displays a hysteresis-dialog for setting the hysteresis value to a 
specified number of vertical divisions. 

taa+ Track 

Average 

Am 

Definition 

The average local baseline-to-peak amplitude for all local features. 

Description 

All local features between the parameter cursors for an input waveform are identified. The local 
baseline-to-peak amplitude is determined for each feature, and the average is returned as taa+. 
Provided for histograms is the local baseline-to-peak amplitude for each local feature between 
the parameter cursors.  

Parameter 
Settings

Selecting this parameter displays a hysteresis-dialog for setting the hysteresis value to a 
specified number of vertical divisions. 

Disk PRML Parameters 

These enable parameter measurements of auto-correlation signal-to-noise (ACSN) and non-linear transition shift 
(NLTS). The calculation of both parameters is based on a 

correlation math function

.

x

ACSN 

can be applied to any periodic waveform. Since these waveforms are by definition identical in every 

period, any deviation is due to uncorrelated noise sources. By performing an auto-correlation calculation of 
the waveform over successive periods, the level of less-than-perfect correlation can be measured. With 
this measurement, the noise level can be derived by ACSN. (See 

ACSN

 description.) 

x

NLTS

offers the ability to measure all echoes in the auto-correlation calculation of a disk waveform. This 

includes the NLTS (adjacent location), second adjacent location, and overwrite (initial magnetization) 
echoes. The parameter performs NLTS averaging, pattern length searching, and limit checking to reduce 
the effects of noise and to ensure accurate measurements. (See 

NLTS

 description.) 

Correlation Theory of Operation 

The DDAs correlation function measures the correlation between one section of a waveform and other sections of 
the same waveform having the same length, or between a section and sections of equal length belonging to 
another waveform.  

When the correlation is performed on the same waveform it is called an auto-correlation. If the shape of two 
waveform sections are identical, the correlation value will be maximized.  

The DDA normalizes correlation values to ±1, with 1 indicating that the waveform sections are identical, -1 that 
the sections are inverted from each other, and 0 that there is no correlation.  

Noiseless periodic waveforms will have perfect correlation (a correlation value of 1) when performing auto-
correlation, and when the start of the second section is an integer number of periods later than the start of the first 
section. 

Содержание DDA 7 Zi series

































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DDA 7 Zi series

iGuzzini B183 Instruction Sheet preview
B183
Бренд: iGuzzini Страницы: 20
Zenbooth Duo Build Instructions preview
Duo
Бренд: Zenbooth Страницы: 60
Abus JC9100 ERIC Assembly And Operating Instructions preview
JC9100 ERIC
Бренд: Abus Страницы: 2
Abus FUSG50110 Quick Manual preview
FUSG50110
Бренд: Abus Страницы: 12
Abu Garcia ZENON Manual preview
ZENON
Бренд: Abu Garcia Страницы: 6
Parker RC Series Maintenance Instructions preview
RC Series
Бренд: Parker Страницы: 5
Bacharach Fyrite INSIGHT Operating & Maintenance Instructions preview
Fyrite INSIGHT
Бренд: Bacharach Страницы: 31
Backyard Play Systems 4105 Instruction Manual preview
4105
Бренд: Backyard Play Systems Страницы: 52
Backyard Play Systems 4030 Instructions Manual preview
4030
Бренд: Backyard Play Systems Страницы: 19
Backyard Play Systems 4030 Manual preview
4030
Бренд: Backyard Play Systems Страницы: 44
Bacharach Monoxor III Specification Sheet preview
Monoxor III
Бренд: Bacharach Страницы: 2
Tascam SX-1 Brochure & Specs preview
SX-1
Бренд: Tascam Страницы: 8
ICP DAS USA I-2533T-FD User Manual preview
I-2533T-FD
Бренд: ICP DAS USA Страницы: 45
Taylor 358 Service Manual preview
358
Бренд: Taylor Страницы: 60
TANDBERG Model 5 Service Manual preview
Model 5
Бренд: TANDBERG Страницы: 23
Backyard Play Systems 4431 Assembly Instructions Manual preview
4431
Бренд: Backyard Play Systems Страницы: 73
M-system Mini-MW Series Manual preview
Mini-MW Series
Бренд: M-system Страницы: 5
MA dot2 User Manual preview
dot2
Бренд: MA Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды