manualshive.com logo in svg

LeCroy DDA 7 Zi series, Руководство оператора

Операторская инструкция для серии LeCroy DDA 7 Zi доступна для бесплатного скачивания на manualshive.com. Узнайте все возможности этого продукта, ознакомившись с подробным руководством по эксплуатации. Скачайте его сейчас и овладейте всеми функциями этой удивительной серии осциллографов LeCroy.

Поделиться
Скачать
background image

WavePro 7Zi 

269

WP700Zi-OM-E-RevA

Enabling Auto-calibration 

You can choose to have your instrument automatically recalibrate itself whenever there is a significant change in 
ambient temperature. If you do not enable this option, the oscilloscope recalibrates only at startup and whenever 
you make a change to certain operating conditions. 

1. Touch 

Utilities  Preferences

 on the menu bar. 

2. Touch 

the 

Automatic Calibration Enable

 checkbox. 

Optimizing Performance 

If this option is available on your oscilloscope, you can set up the oscilloscope to optimize either calculating speed 
or display speed. If the display update rate is of primary concern to you, optimize for Display. If acquisition and 
analysis are more important, optimize for analysis. Optimizing for analysis can be useful when persistence or 
averaging is used, giving higher priority to waveform acquisition at the expense of display update rate. 

The choices are presented as a spectrum with highest values at the extremes: 

1. Touch 

Utilities  Preferences

 on the menu bar. 

2. 

Touch one of the optimization icons. 

Setting an Offset Control 

As you change the gain, this control allows you to either keep the vertical offset level indicator stationary (when 

Div

 is selected) or to have it move with the actual voltage level (when 

Volts

 is selected). The advantage of 

selecting 

Div

 is that the waveform will remain on the grid as you increase the gain; whereas, if 

Volts

 is selected, 

the waveform could move off the grid. 

Note:

 Regardless of whether you select

 Volts

 or 

Div

, the 

Offset 

shown in the channel setup dialog always 

indicates volts. However, when 

Div

 is selected for the Offset Control, the offset in volts is scaled proportional to 

the change in gain, thereby keeping the division on the grid constant. 

1. Touch 

Utilities  Preferences

 on the menu bar. 

2. Touch 

the 

Acquisition

 tab. 

3. Under 

Offset Setting constant in:

, touch either the 

Div

 or 

Volts

 button. 

Setting a Delay Control 

As you change the timebase, this control allows you to either keep the horizontal offset indicator stationary (when 

Div

 is selected) or to have it move with the trigger point (when 

Time

 is selected). The advantage of selecting 

Div

is that the trigger point will remain on the grid as you increase the timebase; whereas, if 

Time

 is selected, the 

trigger point could move off the grid. 

Note:

 Regardless of whether you select

 Time

 or 

Div

, the 

Delay

 shown in the timebase setup dialog always 

indicates time. However, when 

Div

 is selected for Delay In, the delay in time is scaled proportional to the 

change in timebase, thereby keeping the division on the grid constant. 

1. Touch 

Utilities  Preferences

 on the menu bar. 

2. Touch 

the 

Acquisition

 tab. 

3. Under 

Delay Setting constant in:

, touch either the 

Div

 or 

Volts

 button. 

Configuring E-mail Settings 

Before you can send e-mail from the oscilloscope, it must first be configured. 

1. Touch 

Utilities  Preferences

 on the menu bar. 

2. Touch 

the 

E-mail

 tab. 

3. 

Choose an e-mail server protocol: 

 MAPI

 (Messaging Application Programming Interface) is the Microsoft interface specification that allows 

different messaging and workgroup applications (including e-mail, voice mail, and fax) to work through a 
single client, such as the Exchange client. MAPI uses the default Windows e-mail application (usually 
Outlook Express). 

Содержание DDA 7 Zi series

































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DDA 7 Zi series

ABB ACS880-01 Series Installation Manual preview
ACS880-01 Series
Бренд: ABB Страницы: 238
Daavlin 7 Series Operation Manual preview
7 Series
Бренд: Daavlin Страницы: 13
Daavlin 7 Series Operating Instructions Manual preview
7 Series
Бренд: Daavlin Страницы: 27
Parr Instrument 4560 Operating Instructions Manual preview
4560
Бренд: Parr Instrument Страницы: 24
JBL 7130 Installation And Service Manual preview
7130
Бренд: JBL Страницы: 15
Facnor LS Installation Manual preview
LS
Бренд: Facnor Страницы: 33
Osram ENCELIUM User Manual preview
ENCELIUM
Бренд: Osram Страницы: 4
Crosley BT-101 Instruction Manual preview
BT-101
Бренд: Crosley Страницы: 6
Gambro COBE 2991 Essentials Manual preview
COBE 2991
Бренд: Gambro Страницы: 273
Tuffcare Century Max T5200 Operation Manual preview
Century Max T5200
Бренд: Tuffcare Страницы: 11
SCHUNK LPE 100 Assembly And Operating Manual preview
LPE 100
Бренд: SCHUNK Страницы: 24
Gaspardo ORIETTA Use And Maintenance preview
ORIETTA
Бренд: Gaspardo Страницы: 176
laerdal Newborn Anne Directions For Use Manual preview
Newborn Anne
Бренд: laerdal Страницы: 170
Bush Hog Tough Dual-Probe Bale Spear Brochure preview
Tough Dual-Probe Bale Spear
Бренд: Bush Hog Страницы: 2
Taurus DESIGN LINE DUAL PULLEY Assembly Instructions Manual preview
DESIGN LINE DUAL PULLEY
Бренд: Taurus Страницы: 36
LAUMETRIS MKL User Manual preview
MKL
Бренд: LAUMETRIS Страницы: 57
laerdal Resusci Junior Directions For Use Manual preview
Resusci Junior
Бренд: laerdal Страницы: 56
Field Tuff FTF-10GOR Owner'S Manual preview
FTF-10GOR
Бренд: Field Tuff Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды