Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 534 / 774

Out Frames: 0
Out Discards: 0
Out Errors: 0
queue 0: traffic class best-effort, bound to bridge
FastEthernet9/1.1
Queue length 0 Bytes
Forwarded packets 0, Bytes 0
Dropped committed packets 0, Bytes 0
Dropped conformed packets 0, Bytes 0
Dropped exceeded packets 0, Bytes 0
■
Example 2—Uses the brief keyword to display a summary of all bridge interfaces
configured on the router
host1# show bridge westford01 interface brief
Interface Port Status
----------------- -------- ------------
FastEthernet9/1.1 1 Up
FastEthernet9/1.2 2 Up
FastEthernet9/3.1 3 Up
ATM11/0.5 4 Up
ATM11/3.2 5 Up
ATM11/0.7 6 Up
■
See show bridge interface.
Monitoring Subscriber Policies
You can use the show subscriber-policy command to display the rules for all
subscriber policies configured on your router or for a specified subscriber policy.
show subscriber-policy
■
Use to display the set of forwarding and filtering rules for all default and
nondefault subscriber policies configured on the router or for a specified
subscriber policy.
■
For all packet types except Relearn, the command displays permit to indicate
that the bridge interface forwards the packets, or deny to indicate that the bridge
interface filters the packets. (For information about the meaning of permit and
deny for Relearn, see the field descriptions.)
■
Field descriptions
■
Subscriber—Name of the subscriber policy
■
ARP—Specifies how the bridge interface handles ARP packets
■
Broadcast—Specifies how the bridge interface handles broadcast packets
■
Multicast—Specifies how the bridge interface handles multicast packets
■
Unknown Destination—Specifies how the bridge interface handles packets
with unknown unicast DAs
■
Unicast—Specifies how the bridge interface handles unicast (user-to-user)
packets
502 ■
Monitoring Transparent Bridging
JUNOSe 11.1.x Link Layer Configuration Guide