Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 453 / 774

■
Use to display parameters on a PPPoE interface or a PPPoE subinterface.
■
If you do not specify an interface and subinterface, the router displays the PPPoE
interface and Status parameters for all configured interfaces.
■
If you specify an interface with no subinterface, the router displays the PPPoE
interface and Status parameters for that interface.
■
If you specify an interface and subinterface, the router displays detailed
parameters available for that subinterface.
■
Field descriptions
■
PPPoE interface—Interface identifier. For more information about specifying
the physical interface, see Interface Types and Specifiers in
JUNOSe Command
Reference Guide .
■
Status—Operational status of the interface; possible values are:
■
operStatusUp—Interface or subinterface is operational
■
Down—Interface or subinterface is not operational
■
LowerLayerDown —S ubinterface is not operational because an underlying
interface is down
■
full—Displays configuration, status, and statistics information
■
max sessions—Number of maximum allowable PPP sessions configured
■
mtu—Maximum transfer unit (MTU) value; when derived from the PPPoE
MTU tag, the value can only be determined from an active session.
■
acName—Name of PPPoE access concentrator
■
will not send ac info in PADS packet—When the pppoe pads disable-ac-info
command is issued, indicates that the router does not send the AC-Name
and AC-Cookie tags in the PADS packet
■
duplicate-protection—Whether duplicate protection is enabled or disabled
for the interface
■
capture remote circuit id—Whether capture of the PPPoE remote circuit ID
sent from the DSLAM is enabled or disabled for the interface
■
active connections—Number of live PPP connections
■
configured subinterfaces—Number of PPPoE subinterfaces you configured
on an interface
■
Assigned profile—Name of profile assigned to dynamic PPPoE interface
■
PPPoE Statistics Counters
■
PADI received/PADI transmitted—Number of initiation control packets
received/transmitted
■
PADO received/PADO transmitted—Number of offer control packets
received/transmitted
Monitoring PPPoE
■ 421
Chapter 12: Configuring Point-to-Point Protocol over Ethernet