Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 370 / 774

■
Link interface reassembly—Indicates whether MLPPP reassembly is
enabled or disabled on the link interface
■
Link interface administrative MRRU—Administrative MRRU value, in
octets, currently in use on the link interface
■
Baseline status—Indicates whether a statistics baseline has been set
■
Interface statistics:
■
packets—Number of packets received (in) and sent (out) on the interface
■
octets—Number of octets received (in) and sent (out) on the interface
■
errors—Number of errors received (in) and sent (out) on the interface
■
discards—Number of packets discarded on receipt (in) or discarded
before they were transmitted (out)
NOTE: For the LCP, IPCP, and OSINLCP negotiated options, the command displays
a value of “none” if the option was not negotiated.
■
LCP protocol configuration:
■
max-receive-unit—Controls negotiation of the local MRU option; value
can be one of the following:
■
use lower layer—MRU of the layer below PPP defines the MRU to
be negotiated
■
disabled—MRU option is not to be negotiated
■
a numeric value—MRU value to be negotiated
■
authentication—Controls negotiation of the local authentication option;
value can be one of the following:
■
none—Do not negotiate
■
chap—Negotiate CHAP
■
pap—Negotiate PAP
■
chap/pap—Negotiate CHAP, and if it is rejected, negotiate PAP
■
pap/chap—Negotiate PAP, and if it is rejected, negotiate CHAP
■
magic-number—Controls whether the local magic number is negotiated:
enabled (negotiate), or disabled (do not negotiate)
■
magic-number-mismatch—Indicates whether the router is configured
to ignore the LCP peer magic number and retain the PPP connection
when the peer has not negotiated an LCP magic number: ignore (ignore
the peer magic number mismatch and retain the PPP connection), or
reject (router terminates the PPP connection if it detects a peer magic
number mismatch)
338 ■
Monitoring MLPPP
JUNOSe 11.1.x Link Layer Configuration Guide