Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 532 / 774

■
Bridge—Name of the bridge group for which the MAC address table is
displayed
■
Address—MAC address of the entry
■
Action—Specifies how the bridge group handles this entry: forward or discard
■
Interface—Interface type and specifier on which the entry will be forwarded;
this value does not appear for entries that are discarded
■
Age—Length of time that a dynamic entry has been in the forwarding table;
this value does not appear for static entries
■
Example
host1# show bridge westford01 table static
Bridge: westford01 MAC Address Table
Address Action Interface Age
-------------- ---------- ------------------- -----
1a11.22b2.333c forward ATM3/3.1 ---
1234.abcd.5678 discard --- ---
■
See show bridge table.
Monitoring Bridge Interfaces
You can use the show bridge interface command to display information for a
specified bridge interface or for all interfaces assigned to a bridge group.
show bridge interface
■
Use to display configuration, statistics, and status information for a specified
bridge interface or for all interfaces assigned to a bridge group.
■
Field descriptions
■
BridgeGroup—Name of the bridge group to which the interface belongs
■
Port Number—Bridge group port number on which this interface resides
■
Operational Status—Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
■
Admin Status—State of the physical interface: Up, Down
■
Snmp Link Status Trap—Whether SNMP link status processing is enabled or
disabled for the specified bridge interface
■
Max Learn—Maximum number of dynamic MAC addresses that the bridge
group interface can learn
■
Subscriber Policy—Name of the subscriber policy currently in effect for the
bridge group interface
■
Statistics—Displays statistics information for the specified port
500 ■
Monitoring Transparent Bridging
JUNOSe 11.1.x Link Layer Configuration Guide