Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 257 / 774

Marker Protocol response packets: received 0, transmitted 0
Discarded 0, unknown protocol received 0
■
See show interfaces lag.
show interfaces lag members
■
Use to display information about the Ethernet member links in all IEEE 802.3ad
link aggregation group (LAG) bundles configured on the router, or about the
member links in a specified IEEE 802.3ad LAG bundle.
■
Field descriptions
■
Lag—Name of the LAG bundle
■
Administrative status—Operational state that you configured for the LAG
■
Configured MinimumLinks—Minimum number of member links are
configured for the LAG bundle
■
Member-interface—Status of the member interface in the bundle
■
Interface Specifier —Status of the hardware on this interface (up or down)
■
LACP active—Ethernet link participates in the protocol regardless of
whether its Partner member link is set to active or passive LACP PDU
participation
■
LACP passive—Ethernet link transmits LACP PDUs only when it receives
LACP PDUs from its Partner link
■
collecting/distributing—Ethernet link is actively collecting incoming
frames and distributing outgoing frames
■
detached—Ethernet link is detached from the LAG bundle due to protocol
changes or system constraints
■
waiting—Ethernet link is waiting to attach to a LAG bundle
■
Example
host1# show interfaces lag members
Lag bostonBundle is Up, Administrative status is Up
Configured MinimumLinks 2
Member-interface FastEthernet0/0 is Up
(LACP active, state collecting/distributing)
Member-interface FastEthernet0/5 is Up
(LACP active, state collecting/distributing)
Lag actonBundle is Up, Administrative status is Up
Member-interface FastEthernet4/0 is Up
(LACP passive, state collecting/distributing)
Member-interface FastEthernet4/6 is Up
(LACP passive, state collecting/distributing)
2 lag interfaces found
■
See show interfaces lag members.
Monitoring 802.3ad Link Aggregation
■ 225
Chapter 6: Configuring 802.3ad Link Aggregation and Link Redundancy