Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 35 / 774

Chapter 1
Configuring ATM
This chapter introduces basic Asynchronous Transfer Mode (ATM) concepts, describes
features of the ATM interfaces, and provides information for configuring ATM on E
Series routers.
This chapter contains the following sections:
■
Overview on page 3
■
Platform Considerations on page 10
■
References on page 11
■
Supported Features on page 12
■
ATM NBMA on page 13
■
Operations, Administration, and Management of ATM Interfaces on page 15
■
Before You Configure ATM on page 21
■
Configuration Tasks on page 22
■
Creating a Basic Configuration on page 22
■
Setting Optional Parameters on page 24
■
Configuring OAM on page 33
■
Configuring an NBMA Interface on page 39
■
Creating an NBMA Static Map on page 40
■
Assigning Descriptions to Interfaces on page 42
■
Sending Interface Descriptions to AAA on page 43
■
Configuring Individual ATM PVC Parameters on page 45
■
Configuring ATM VC Classes on page 55
■
Configuring Dynamic ATM 1483 Subinterfaces on page 69
■
Monitoring ATM on page 69
Overview
ATM is a high-speed networking technology that handles data in fixed-size units
called cells. It enables high-speed communication between edge routers and core
routers in an ATM network.
Overview
■ 3