Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 529 / 774

■
Learning—Whether acquisition of dynamically learned MAC addresses is
currently enabled or disabled
■
Max Learn—Maximum number of dynamic MAC addresses that the bridge
group can learn
■
Link Status Snmp Traps—Whether SNMP link status processing is enabled
or disabled for all bridge interfaces in the bridge group
■
Subscriber Policy—Name of the subscriber policy currently in effect for the
bridge group
■
Protocol Actions—When CRB is enabled, displays the protocols (IP, MPLS,
or PPPoE) for which explicit routing has been configured
■
Port Count—Number of ports (interfaces) currently configured for the bridge
group; this value typically matches the Interface Count
■
Interface Count—Number of bridge group interfaces currently configured
for the bridge group
■
Example 1—Displays the names of the bridge groups configured on your router
host1# show bridge groups
BridgeGroup: westford02
BridgeGroup: westford01
■
Example 2—Displays the configuration settings for each bridge group on your
router
host1# show bridge groups details
BridgeGroup: westford02
Bridge Mode: CRB
Aging Time: 300 secs
Learning: Enabled
Max Learn: Unlimited
Link Status Snmp Traps: Disabled
Subscriber Policy: client01
Protocol Actions:
Route IP
Route PPPoE
Port Count: 0
Interface Count: 0
BridgeGroup: westford01
Bridge Mode: CRB
Aging Time: 300 secs
Learning: Enabled
Max Learn: Unlimited
Link Status Snmp Traps: Disabled
Subscriber Policy: default Subscriber
Protocol Actions:
Port Count: 1
Interface Count: 1
■
See show bridge groups.
show bridge port
Monitoring Transparent Bridging
■ 497
Chapter 15: Configuring Transparent Bridging