Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 255 / 774

■
LACP state
■
active—Actor link actively particulates in LACP
■
passive—Actor link transmits LACP PDUs
■
timeout—Timeout control value; this value is not configurable and is set
to long timeout (30 seconds)
■
aggregatable—Actor link can be aggregated
■
individual—Actor link cannot be aggregated; must operate as an
individual link
■
in-sync—Actor link has joined the correct LAG bundle
■
out-of-sync—Actor link is unable to join the correct LAG bundle
■
collecting—Actor link is actively collecting incoming frames; if this field
does not appear, the Actor link is not actively collecting incoming frames
■
distributing—Actor link is actively distributing outgoing frames; if this
field does not appear, the Actor link is not actively distributing outgoing
frames
■
defaulted—Actor link is using defaulted operational information about
the Partner link that was administratively configured for Partner; if this
field does not appear, the operational information about the Partner link
has been received by the Actor link in an LACP PDU
■
expired—Actor link’s receive machine is expired; if this field does not
appear, the Actor link’s receive machine is active
■
port—Port number assigned to the Ethernet link by the Actor link
■
priority—Priority assigned to this Ethernet link by the Actor link
■
Key—Operational key value assigned to the Ethernet link by the Actor link
■
System Priority—Priority assigned to the Ethernet link by the system
■
System MAC Address—MAC address assigned to the Actor link
■
Partner—Status of the Partner link
■
active— Partner link participates in the LACP
■
passive—Partner link transmits LACP PDUs
■
timeout—Timeout control value; short timeout or long timeout
■
aggregatable—Partner link can be aggregated
■
individual—Partner link cannot be aggregated
■
in-sync—Partner link has joined the correct LAG bundle
■
out-of-sync—Partner link has joined the incorrect LAG bundle
Monitoring 802.3ad Link Aggregation
■ 223
Chapter 6: Configuring 802.3ad Link Aggregation and Link Redundancy