Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 631 / 774

configure the interface as dynamic and to specify configuration sources for the
dynamic upper layers. These files can then be executed by the router as though the
commands were entered at the terminal.
■
Scripts—You can create script files containing a series of CLI commands. The
resulting script can be executed via the
configure file command.
■
Macros—You can create macros that generate and execute CLI commands. You
first write macros on a computer and then copy them to the router. You issue
the
macro command from the CLI to execute both local macros or macros stored
remotely. The macro command is available from all command modes. See
chapter
Writing CLI Macros in JUNOSe System Basics Configuration Guide .
NOTE: For a list of vendor-specific attributes (VSAs) that apply to dynamic interfaces,
see JUNOSe Broadband Access Configuration Guide .
Monitoring Upper-Layer Dynamic Interfaces and Profiles
You can use the show commands described in this section to monitor configurations
created with dynamic interfaces and profiles.
NOTE: The E120 and E320 routers output for monitor and show commands is
identical to output from other E Series routers, except that the E120 and E320 routers
output also includes information about the adapter identifier in the interface specifier
(
slot / adapter / port ).
show atm aal5 interface
■
Use to display information about a configured ATM AAL5 interface.
■
Field descriptions
■
AAL5 Interface operational status—Operational status of the AAL5 interface:
up, down, lowerLayerDown
■
time since last status change—Time since last reported change to the AAL5
interface operational status in hh:mm:ss format
■
SNMP trap link-status—Whether SNMP link status traps are enabled or
disabled on the ATM AAL5 interface
■
Auto configure ATM 1483 status—Whether the autoconfiguration feature for
a dynamic ATM 1483 subinterface configured over the ATM AAL5 interface
is enabled or disabled
■
InPackets—Number of packets received on this interface
■
InBytes—Number of bytes received on this interface
■
OutPackets—Number of packets transmitted on this interface
Monitoring Upper-Layer Dynamic Interfaces and Profiles
■ 599
Chapter 17: Configuring Dynamic Interfaces