Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 61 / 774

■
module —Internal clock is from the line module (the default)
■
chassis —Internal clock is from the configured system clock
■
Example
host1(config-if)# atm clock internal
■
Use the no version to cause ATM interfaces to recover the clock from the received
signal.
■
See atm clock internal.
atm framing
■
Use to configure T3 or E3 framing on an ATM interface.
■
Specify one of the following framing types for a T3 (DS3) interface:
■
cbitadm —c-bit with ATM direct mapping
■
cbitplcp —c-bit with PLCP framing (default)
■
m23adm —M23 ATM direct mapping
■
m23plcp —M23 with PLCP framing
■
Specify one of the following framing types for an E3 interface:
■
g832adm —G.832 ATM direct mapping
■
g751adm —G.751 ATM direct mapping
■
g751plcp —G.751 PLCP mapping (default)
■
Example
host1(config-if)# atm framing g751adm
■
Use the no version to return framing to the default:
■
For a T3 interface, the default is cbitplcp
■
For an E3 interface, the default is g751plcp
■
See atm framing.
atm ilmi-enable
■
Use to enable ILMI on the interface.
■
Example
host1(config-if)# atm ilmi-enable
■
Use the no version to disable ILMI on the interface.
■
See atm ilmi-enable.
atm ilmi-keepalive
Setting Optional Parameters
■ 29
Chapter 1: Configuring ATM