Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 460 / 774

■
Example 4—Displays the names of all PPPoE service name tables configured on
the router
host1# show pppoe-service-name-table brief
Service-Name Table:
myServiceTable1
myServiceTable2
■
See show pppoe-service-name-table.
show pppoe subinterface
■
Use to display parameters for PPPoE subinterfaces.
■
If you do not specify a subinterface, the router displays the configured PPPoE
subinterface number and status for all configured PPPoE subinterfaces.
■
If you specify an interface with no subinterface, the router displays the status
for the subinterfaces associated with the interface.
■
If you specify an interface and subinterface, the router displays detailed
parameters available for that subinterface.
■
To display configuration, status, and statistics information, use the full keyword.
■
Field descriptions
■
PPPoE subinterface—Interface specifier
■
Status—Operational status of the interface. Possible values are:
■
operStatusUp—Interface or subinterface is operational
■
Down—Interface or subinterface is not operational
■
LowerLayerDown—Subinterface is not operational because an underlying
interface or subinterface is down
■
URL String—URL string sent in the PADM message to PPPoE clients
■
MOTM String—Message of the minute string sent in the PADM message to
PPPoE clients
■
session id—Session ID of the subinterface
■
source MAC address—MAC address of PPPoE client
■
MTU—Maximum transfer unit (MTU) value; when derived from the PPPoE
MTU tag, the value can only be determined from an active session.
■
In Octets—Number of octets received on the subinterface
■
Out Octets—Number of octets transmitted on the subinterface
■
In Packets—Number of packets received on the subinterface
■
Out Packets—Number of packets transmitted on the subinterface
■
Example 1
428 ■
Monitoring PPPoE
JUNOSe 11.1.x Link Layer Configuration Guide