Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 177 / 774

■
Frame relay DTE interface mlframe-relay—Name of the MLFR bundle
■
N391—Value of the N391 full-status polling counter
■
N392—Value of the N392 error threshold counter
■
N393—Value of the N393 monitored events counter
■
T391—Value of the T391 link integrity polling timer interval
■
Configured LMI type—One of the following options:
■
ANSI—ANSI T1.617 Annex D
■
Q933A—ITU-T Q.933 Annex A
■
Cisco—Original Group of Four specification developed by DEC, Northern
Telecom, Stratacom, and Cisco
■
None—Suppresses LMI
■
status is up—Availability of the MLFR bundle: up or down
■
Number of interface down transitions—Number of times the interface has
become unavailable
■
Time since last status change—elapsed time since LMI information changed
■
Enquiries sent — Total number of LMI status inquiries sent by the DTE
on this interface
■
Full enquiries sent—Total number of LMI full status inquiries sent by the
DTE on this interface
■
Enquiry responses received — Total number of LMI full and regular status
responses received by the DTE on this interface
■
Full enquiry responses received — Total number of LMI full status
responses received by the DTE on this interface
■
Async updates received—Total number of asynchronous LMI updates
received by the DTE on this interface
■
Unknown messages received—Total number of unknown LMI messages
received on this interface
■
Loss of sequencing detected—Total number of times a loss of sequencing
in received LMI messages was detected by the DTE on this interface
■
No response timeouts—Total number of times a timeout occurred without
receiving a response to an LMI request by the DTE on this interface
■
Last sequence number sent—Last sequence number sent on this interface
■
Last sequence number received—Last sequence number received on
this interface
■
DCE field descriptions:
Monitoring MLFR
■ 145
Chapter 3: Configuring Multilink Frame Relay