Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 175 / 774

Frame relay multilink member-interface 4/0:1 is up
Frame relay multilink member-interface 4/1:1 is up
■
See show frame-relay interface.
show frame-relay lip
■
Use to display the state of MLFR Link Integrity Protocol (LIP) on an MLFR link.
■
Use the brief keyword to display the operational status of all configured interfaces.
■
Use the delta keyword to specify that baselined statistics are to be shown.
■
Field descriptions
■
Frame relay interface—Specifier for the Frame Relay interface
■
Status of the major Frame Relay interface—One of the following states:
■
Up — Traffic can flow on the interface
■
Offline — Traffic cannot flow because hardware is unavailable
■
Down — Traffic cannot flow because of a problem in the interface at the
current protocol layer
■
LowerLayerDown — Traffic cannot flow because of a problem in an
interface at a lower protocol layer
■
AdministrativelyDown — Traffic cannot flow because of manual
administrative intervention
■
Number of interface down transitions—Number of interfaces that have
changed to a down state
■
Time since last status change—Time since the interface last changed its state
■
Add Links sent—Number of Add Link messages sent from this interface
■
Add Links received—Number of Add Link messages received on this interface
■
Add Link Acknowledgments sent—Number of Add Link acknowledgments
sent from this interface
■
Add Link Acknowledgments received—Number of Add Link acknowledgments
received on this interface
■
Add Link Rejects sent—Number of Add Link Reject messages sent from this
interface
■
Add Link Rejects received—Number of Add Link Reject messages received
on this interface
■
Hellos sent—Number of Hello messages sent from this interface
■
Hellos received—Number of Hello messages received on this interface
■
Hello Acknowledgments sent—Number of Hello messages sent from this
interface
Monitoring MLFR
■ 143
Chapter 3: Configuring Multilink Frame Relay