Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 178 / 774

■
Frame relay DCE interface mlframe-relay—Name of the MLFR bundle
■
N391—Value of the N391 full-status polling counter
■
N392—Value of the N392 error threshold counter
■
T392—Value of the T392 polling verification timer
■
Configured LMI type: one of the following options:
■
ANSI—ANSI T1.617 Annex D
■
Q933A—ITU-T Q.933 Annex A
■
Cisco—Original Group of Four specification developed by DEC, Northern
Telecom, Stratacom, and Cisco
■
None—Suppresses LMI
■
status is up—Availability of the MLFR bundle: up or down
■
Number of interface down transitions—Number of times the interface has
become unavailable
■
Time since last status change—Elapsed time since LMI information changed
■
Enquiries received—Total number of LMI status inquiries received by
the DCE on this interface
■
Enquiry responses sent—Total number of LMI status responses sent by
the DCE on this interface
■
Full enquiry responses sent—Total number of LMI full status responses
sent by the DCE on this interface
■
Async updates sent—Total number of LMI ASYNC updates sent by the
DCE on this interface
■
Unknown messages received—Total number of unknown LMI messages
received on this interface
■
Loss of sequencing detected—Total number of times a loss of sequencing
in received LMI messages was detected by the DCE on this interface
■
No response timeouts—Total number of times a timeout occurred without
receiving a status inquiry from the DTE on this interface
■
Last sequence number sent—Last sequence number sent on this interface
■
Last sequence number received—last sequence number received on this
interface
■
Example 1
host1# show frame-relay lmi brief
LMI information for frame relay DTE interface mlframe-relayTEST
DTE parameter N391 is 6, N392 is 3, N393 is 4, T391 is 10
Configured LMI type is ANSI, status is up
Number of interface down transitions is 0
Time since last status change 00:05:39
146 ■
Monitoring MLFR
JUNOSe 11.1.x Link Layer Configuration Guide