Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 293 / 774

Table 14: show ethernet oam lfm summary Output Fields (continued)
Field Description Field Name
Provides information about the physical link; displays one or
more of the following values:
■
Remote-Stable—Indicates remote OAM client
acknowledgment and acceptance of local OAM state
information. False indicates that remote entity either has
not received or remote state settings do no match local state
information. True indicates that remote entity has received
and remote state settings match local state information
■
Local-Stable—Indicates local OAM client acknowledgment
and acceptance of remote OAM state information. False
indicates that local entity either has not received or local
state settings do not match remote state information. True
indicates that local entity has received and local state settings
match remote state information
■
Local-Evaluating—The Local Stable and Local Evaluating bits
of the Flags field communicate the status of the local
discovery process to the peer. When the OAM discovery
process is started, the local entity sets the Local Stable to 0
and Local Evaluating bits to 1 indicating OAM discovery has
not completed. When Local Stable is set to 1 and Local
Evaluating is set to 0 and Remote Stable is set to 1 and
Remote Evaluating is set to 0 indicating that the settings of
both the local and remote OAM clients match, the OAM
Discovery process has successfully completed
■
Remote-State-Valid—Indicates the OAM client has received
remote state information found within Local Information
TLVs of received Information OAM PDUs. False indicates
that OAM client has not seen remote state information. True
indicates that the OAM client has seen remote state
information
Flags
State of the loopback functionality of the local and remote OAM
entities; displays one or more of the following values:
■
Supported—Indicates that the Ethernet OAM configuration
on the interface is configured to initiate remote loopback
or respond to a remote loopback request it receives from a
peer. When you place a remote entity into loopback mode,
the interface receives the remote-loopback request and puts
the interface into remote-loopback mode. When a
remote-loopback request is sent by a remote entity, the local
interface is placed into loopback mode
■
Local enabled—Indicates that the loopback operation is
enabled on the specified interface of the local OAM entity,
which causes the local entity to loop back the received
frames other than OAM PDUs to the remote peer
■
Remote enabled—Indicates that the loopback operation is
enabled on the specified interface of the remote peer, which
causes the remote peer to loop back all received frames
other than OAM PDUs to the local OAM entity
Loopback
Monitoring OAM Link-Fault Management Sessions on All Configured Interfaces
■ 261
Chapter 7: Configuring IEEE 802.3ah OAM Link-Fault Management