Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 183 / 774

■
Use the optional delta keyword to specify that baselined statistics are to be
shown.
■
Field descriptions
■
Frame relay sub-interface mlframe-relay—Name and subinterface number
of the MLFR bundle in the format
bundle-name.subinterface-number
■
status—State of the subinterface, as follows:
■
Up — Traffic can flow on the interface
■
Offline — Traffic cannot flow because hardware is unavailable
■
Down — Traffic cannot flow because of a problem in the interface at the
current protocol layer
■
LowerLayerDown — Traffic cannot flow because of a problem in an
interface at a lower protocol layer
■
AdministrativelyDown — Traffic cannot flow because of manual
administrative intervention
■
Number of sub-interface down transitions—Number of times a subinterface
came down because of error conditions
■
Time since last status change—Time since the last status change on the
subinterface
■
In bytes — Number of inbound bytes received on the subinterface
■
Out bytes — Number of outbound bytes transmitted on the subinterface
■
In frames—Number of inbound frames received on the interface
■
Out frames—Number of outbound frames transmitted on the interface
■
In errors—Number of inbound errors received on the subinterface
■
Out errors — Number of outbound errors transmitted on the subinterface
■
In discards—Number of inbound packets discarded
■
Out discards — Number of outbound packets discarded
■
In unknown protos — Number of packets received on the subinterface with
unknown protocols
■
Example 1
host1# show frame-relay subinterface brief
Frame relay sub-interface mlframe-relayTEST.1, status is up
Frame relay sub-interface mlframe-relayTEST.2, status is up
■
Example 2
host1# show frame-relay subinterface mlframe-relay TEST
Frame relay sub-interface mlframe-relayTEST.1, status is up
Number of sub-interface down transitions is 0
Time since last status change 00:07:49
Monitoring MLFR
■ 151
Chapter 3: Configuring Multilink Frame Relay