Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 640 / 774

■
Field descriptions
■
Lockout Configuration (seconds)—Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column
■
Min—Minimum lockout time, in seconds
■
Max—Maximum lockout time, in seconds
■
Total clients in active lockouts—Number of PPPoE clients currently
undergoing dynamic encapsulation type lockout
■
Total clients in lockout grace period—Number of PPPoE clients currently
in a lockout grace period; for more information about the lockout grace
period, see “Guidelines for Configuring Encapsulation Type Lockout” on
page 527
■
Example
host1# show pppoe interface atm 3/0.101
. . .
Lockout Configuration (seconds): Min 5, Max 60
Total clients in active lockouts: 0
Total clients in lockout grace period: 0
■
See show pppoe interface.
show pppoe interface lockout-time
■
Use to display detailed information about the current encapsulation type lockout
condition for each PPPoE client associated with a dynamic PPPoE subinterface
column on a static PPPoE major interface.
■
Field descriptions
■
PPPoE interface—Specifier for the PPPoE interface
■
Lockout Configuration (seconds)—Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column
■
Min—Minimum lockout time, in seconds
■
Max—Maximum lockout time, in seconds
■
Total clients in active lockouts—Number of PPPoE clients currently
undergoing dynamic encapsulation type lockout
■
Total clients in lockout grace period—Number of PPPoE clients currently
in a lockout grace period; for more information about the lockout grace
period, see “Guidelines for Configuring Encapsulation Type Lockout” on
page 527
■
Client Address—Source MAC address of the PPPoE client
■
Current—Current lockout time, in seconds; displays 0 (zero) if the PPPoE
client is not undergoing lockout
608 ■
Monitoring Upper-Layer Dynamic Interfaces and Profiles
JUNOSe 11.1.x Link Layer Configuration Guide