Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 110 / 774

■
OutErrors—Number of outgoing errors on this interface
■
InPacketDiscards—Number of incoming packets discarded on this interface
■
InByteDiscards—Number of incoming bytes discarded on this interface
■
InCellErrors—Increments when a T3 or an E3 ATM interface receives cells
for a VPI or VCI that is not configured on that interface
■
Field descriptions specific to the applicable physical interface. In Example 1, the
output contains the following physical interface fields:
■
SONET path operational status—State of the SONET path interface: up, down,
lowerLayerDown
■
time since last status change—Time since last reported change to the SONET
path operational status
■
SONET operational status—State of SONET interface: up, down,
lowerLayerDown
■
time since last status change—Time since last reported change to the SONET
operational status
■
PHY Type—Physical port type on which this interface is running
■
Framing—Framing type of the physical interface
■
TX clocking—Clocking type for the physical interface
■
Loopback—Loopback status for the physical interface: enabled, disabled
■
Receive FIFO Overruns—Number of times received FIFO was overrun
■
qos-mode-port—Status of SAR backpressure: enabled, disabled
■
queue—Hardware packet queue associated with the specified traffic class
and interface
■
Forwarded packets, Bytes—Number of packets and bytes forwarded on this
queue
■
Dropped committed packets, Bytes—Number of committed packets and
bytes that were dropped
■
Dropped conformed packets 0, Bytes 0—Number of conformed packets and
bytes that were dropped
■
Dropped exceeded packets 0, Bytes 0—Number of exceeded packets and
bytes that were dropped
■
Interface—ATM interface identifier
■
Status—Status of the ATM interface: up, down, lowerLayerDown
■
Configured VCs—Number of VCs configured on the interface
■
Example 1—Displays information about a specific interface
78 ■
Monitoring ATM
JUNOSe 11.1.x Link Layer Configuration Guide