Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 225 / 774

In: Bytes 39256, Packets 612
Multicast 0, Broadcast 0
Errors 0, Discards 0
Out: Bytes 4536220, Packets 70873
Multicast 0, Broadcast 70258
Errors 0, Discards 0
ARP Statistics:
In: ARP requests 1, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 1, ARP responses 0
Errors 0, Discards 0
■
Example 2—Displays the status of a Fast Ethernet S-VLAN subinterface
host1:vr2# show interfaces fastEthernet 0/0.1
FastEthernet0/0.1 is Up, Administrative status is Up
SVLAN ID: 1, VLAN ID: 0, Ethertype 0x9100
In: Bytes 39256, Packets 612
Multicast 0, Broadcast 0
Errors 0, Discards 0
Out: Bytes 4536220, Packets 70873
Multicast 0, Broadcast 70258
Errors 0, Discards 0
ARP Statistics:
In: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 0, ARP responses 0
Errors 0, Discards 0
■
See show interfaces.
show interfaces gigabitEthernet
show interfaces tenGigabitEthernet
■
Use to display the status of Gigabit Ethernet interfaces, 10-Gigabit Ethernet
interfaces, VLAN subinterfaces, or S-VLAN subinterfaces.
■
You can specify the following keywords:
■
delta —Specifies that baselined statistics are to be shown
■
brief —Displays the operational status of all configured interfaces
■
Field descriptions when you display the status of a Gigabit Ethernet or 10-Gigabit
Ethernet VLAN or S-VLAN subinterface
■
Subinterface number —Location of the subinterface that carries the VLAN or
S-VLAN traffic
■
Administrative status—Operational state that you configured for this interface;
up or down
■
VLAN ID—Domain number of the VLAN
■
SVLAN ID—Domain number of the stacked VLAN
■
Ethertype—Ethertype assignment for the S-VLAN subinterface, 0x8100,
0x88a8, or 0x9100; 0x9100 is the default
Monitoring VLAN and S-VLAN Subinterfaces
■ 193
Chapter 5: Configuring VLAN and S-VLAN Subinterfaces