Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 112 / 774

ATM 4/0 up 2
ATM 6/0 lowerLayerDown 2
■
See show atm interface.
■
See show interfaces.
show atm map
■
Use to display the list of all configured ATM static maps to remote hosts on an
ATM network.
■
Field descriptions
■
Map list—Name of map list and method used to enter the map list.
PERMANENT indicates that the map entry was configured; it was not entered
automatically by a process.
■
protocol address maps to VCx — Name of protocol, the protocol address, and
the VCD that the address is mapped to (for ATM VCs configured with the
atm pvc command).
■
VC—Number of the virtual circuit
■
broadcast—Indicates pseudo-broadcasting
■
connection up—Indicates a point-to-point virtual circuit
■
Example 1
host1# show atm map
Map list my-map : PERMANENT
ip 192.168.2.10 maps to VC 10 atm 2/0
ip 192.168.2.20 maps to VC 11 atm 2/0 broadcast
ip 192.168.2.30 maps to VC 12 atm 2/0
Map list other-map : PERMANENT
ip 192.10.2.10 maps to VC 100 atm 2/1
ip 192.10.2.20 maps to VC 101 atm 2/1
ip 192.10.2.30 maps to VC 102 atm 2/1 broadcast
■
Example 2
host1# show atm map brief
Map list my-map : PERMANENT
Map list other-map : PERMANENT
■
Example 3
host1# show atm map my-map
Map list my-map : PERMANENT
ip 192.168.2.10 maps to VC 10 atm 2/0
ip 192.168.2.20 maps to VC 11 atm 2/0 broadcast
ip 192.168.2.30 maps to VC 12 atm 2/0
■
See show atm map.
show atm oam
80 ■
Monitoring ATM
JUNOSe 11.1.x Link Layer Configuration Guide