Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 158 / 774

In frames: 1233 Out frames: 1233
In errors: 0 Out errors: 0
In discards: 0 Out discards: 0
In unknown protos: 0
Frame relay interface 3/2:3/1, status is up
Description: chicago03
Time since last status change 01:20:38
In bytes: 19696 Out bytes: 60744
In frames: 1231 Out frames: 1231
In errors: 0 Out errors: 0
■
See show frame-relay interface.
show frame-relay lmi
■
Use to display configuration and state information and statistics about the LMI
for a multilink Frame Relay, POS, serial, or GRE tunnel interface.
■
Optionally, you can specify an interface using the interface type and specifier.
For more information, see Interface Types and Specifiers in
JUNOSe Command
Reference Guide .
■
Use the optional delta keyword to specify that baselined statistics are to be
shown.
■
Field descriptions
■
This command displays both DTE and DCE fields for NNI.
■
For the DTE:
■
Enquiries sent—Total number of LMI status enquiries sent by the DTE
on this interface
■
Full enquiries sent—Total number of LMI full-status enquiries sent by
the DTE on this interface
■
Enquiry responses received—Total number of LMI full- and regular-status
responses received by the DTE on this interface
■
Full enquiry responses received—Total number of LMI full-status
responses received by the DTE on this interface
■
Async updates received—Total number of LMI asynchronous updates
received by the DTE on this interface
■
Unknown messages received—Total number of unknown LMI messages
received on this interface
■
Loss of sequencing detected—Total number of times a loss of sequencing
in received LMI messages was detected by the DTE on this interface
■
No response timeouts—Total number of times a timeout occurred without
receiving a response to an LMI request by the DTE on this interface
■
Last sequence number sent—Last sequence number sent on this interface
■
Last sequence number received—Last sequence number received on
this interface
126 ■
Monitoring Frame Relay
JUNOSe 11.1.x Link Layer Configuration Guide