Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 173 / 774

■
You cannot set a baseline for groups of interfaces, subinterfaces, or circuits. You
must set baselines one at a time.
■
When baselining is requested, the time since the last baseline was set is displayed
in
hours:minutes:seconds or days/hours format. If a baseline has not been set, the
message “ No baseline has been set” is displayed instead.
■
The regular interface statistics and LMI statistics for interfaces are subject to the
same baseline timestamp. You cannot set separate baselines for these statistics.
■
Use the optional delta keyword with Frame Relay show commands to specify
that baselined statistics are to be shown.
■
Example
host1# baseline frame-relay interface mlframe-relay boston
■
There is no no version.
■
See baseline frame-relay interface.
baseline frame-relay multilinkinterface
■
Use to set a statistics baseline for MLFR links.
■
The router implements the baseline by reading and storing the statistics at the
time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
■
When baselining is requested, the time since the last baseline was set is displayed
in
hours:minutes:seconds or days/hours format. If a baseline has not been set, the
message “ No baseline has been set” is displayed instead.
■
The regular interface statistics and LIP statistics for interfaces are subject to the
same baseline timestamp. You cannot set separate baselines for these statistics.
■
Use the optional delta keyword with Frame Relay show commands to specify
that baselined statistics are to be shown.
■
Example
host1# baseline frame-relay multilinkinterface serial 3/2
■
There is no no version.
■
See baseline frame-relay multilinkinterface.
show frame-relay interface
■
Use to display the information about the Frame Relay layer of the interface.
■
Use the brief keyword to display the operational status of all configured interfaces.
■
Use the optional delta keyword to specify that baselined statistics are to be
shown.
■
Field descriptions
■
Frame relay interface mlframe-relay—Name of the MLFR bundle
■
Status of the major Frame Relay interface—One of the following states:
Monitoring MLFR
■ 141
Chapter 3: Configuring Multilink Frame Relay