Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 514 / 774

host1(config)# bridge westford02 subscriber-policy client01
■
Use the no version to remove the association with the subscriber policy.
NOTE: You cannot change the default subscriber policy values for a trunk (server)
bridge interface. As a result, you cannot use the bridge subscriber-policy command
to associate a nondefault subscriber policy with a trunk bridge interface.
■
See bridge subscriber-policy.
broadcast
■
Use to modify the subscriber policy for the broadcast protocol to define whether
a subscriber (client) bridge interface permits (forwards) or denies (filters or drops)
broadcast packets.
■
Specify one of the following keywords:
■
permit —Forwards packets of this type
■
deny —Filters or drops packets of this type
■
Broadcast packets are filtered or dropped by default.
■
Example
host1(config-policy)# broadcast permit
■
Use the no version to restore the default value.
■
See broadcast.
ip
■
Use to modify the subscriber policy for IP to define whether a subscriber (client)
bridge interface permits (forwards) or denies (filters or drops) IP packets.
■
Specify one of the following keywords:
■
permit —Forwards packets of this type
■
deny —Filters or drops packets of this type
■
IP packets are forwarded by default.
■
Example
host1(config-policy)# ip deny
■
Use the no version to restore the default value.
■
See ip.
mpls
482 ■
Configuration Tasks
JUNOSe 11.1.x Link Layer Configuration Guide