Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 371 / 774

■
keepalive-timer—Rate of LCP echo requests, in seconds
■
restart-timer—Retry frequency during LCP, IPCP, and OSINLCP
negotiations, in seconds
■
max-terminate—Maximum number of terminate requests
■
max-configure—Maximum number of configure requests
■
max-failure—Maximum number of configure NAKs
■
LCP protocol status:
■
link-status—Indicates the overall status of LCP negotiations, including
the following states: initial (idle), starting (ready to negotiate),
authenticate (authenticating), and network (LCP is up)
■
LCP negotiated options:
■
max-receive-unit—Negotiated maximum receive unit, in octets, for the
local and remote (peer) side of the link
■
max-receive-reconstructed-unit—Negotiated maximum receive
reconstructed unit, in octets, for the local and remote (peer) side of the
link
■
authentication—Negotiated authentication method (none, pap, or chap)
for the local and remote (peer) side of the link
■
magic-number—Negotiated magic number for the local and remote
(peer) side of the link
■
pfc—Negotiated pfc (none or enabled) for the local and remote (peer)
side of the link
■
acfc—Negotiated acfc (none or enabled) for the local and remote (peer)
side of the link
NOTE: The command displays a value of “none” for any negotiated option parameters
if the option was not negotiated.
■
LCP Endpoint Discriminator options:
■
local discriminator class—Endpoint discriminator type, format, and
address space for the local system
■
local endpoint discriminator—Endpoint discriminator value for the local
system within the specified class
■
peer discriminator class—Endpoint discriminator type, format, and
address space for the remote system
■
peer endpoint discriminator—Endpoint discriminator value for the
remote system within the specified class
Monitoring MLPPP
■ 339
Chapter 9: Configuring Multilink PPP