Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 126 / 774

■
Use to display information about a specific VC.
■
To specify the circuit to display, do one of the following:
■
Enter the VCD.
■
Use the vpi-vci keyword and enter the VPI and VCI.
■
Enter the description configured for the ATM 1483 subinterface (with the
atm atm1483 description command) on which the VC resides.
■
Field descriptions
■
VCD—Virtual circuit descriptor
■
VPI—Virtual path identifier
■
VCI—Virtual channel identifier
■
Encap—Encapsulation method
■
Service Type—Service type configured on the VC: UBR, UBR-PCR, NRT-VBR,
RT-VBR, CBR
■
Inverse ARP enable—Whether or not Inverse ARP is enabled: yes, no
■
Assigned VC class—Name of the VC class assigned to this VC, if configured
■
InPackets—Number of packets received on this circuit
■
InBytes—Number of bytes received on this circuit
■
InCells—Number of ATM cells received on this circuit
■
OutPackets—Number of packets transmitted on this circuit
■
OutBytes—Number of bytes transmitted on this circuit
■
OutCells—Number of ATM cells transmitted on this circuit
■
InErrors—Number of errors received on this circuit
■
OutErrors—Number of outgoing errors on this circuit
■
InPacketDiscards—Number of incoming packets discarded on this circuit
■
InPacketUnknownProtocol—Number of incoming packets with an unknown
protocol type
■
InByteDiscards—Number of incoming bytes discarded on this circuit
■
CrcErrors—Number of CRC errors detected on this circuit
■
SAR time-outs—Number of segmentation and reassembly (SAR) timeouts
reached on this circuit
■
Over-sized SDUs—Number of oversized service data units (SDUs) received
on this circuit
■
Alarm drop count—Number of successive alarm cells that the router receives
before reporting that the PVC is down
94 ■
Monitoring ATM
JUNOSe 11.1.x Link Layer Configuration Guide