Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 588 / 774

■
Use to select an ATM interface or ATM 1483 subinterface.
■
For information about specifying the ATM interface or subinterface, see “interface
atm” on page 532.
■
Examples
host1(config)# interface atm 5/0.1
host1(config)# interface atm 4/0/2.1
■
Use the no version to remove the interface or subinterface.
■
See interface atm.
profile
■
Use to assign a profile.
■
You must specify the encapsulation type to which the profile applies:
bridgedEthernet,
ip , ppp, pppoe , or any .
■
Specify a profile name with up to 80 alphanumeric characters.
■
Example
host1(config-subif)# profile ppp foo
■
Use the no version to remove a profile assignment.
■
See profile.
subscriber
■
Use to configure a local subscriber on the E Series router to support authentication
and configuration from RADIUS for a dynamic IPoA or bridged Ethernet interface.
■
When you configure a subscriber, you must specify the following:
■
interfaceType —Type of dynamic interface, bridgedEthernet or ip
■
userNameUsage —How the dynamic interface uses the username for
authentication purposes
■
user —Use the name as specified.
■
user-prefix —Use the name as a prefix to the interface physical location.
The router automatically postpends the physical location of the user to
the username string. The username format is userName.slot.port.vpi.vci.
The resulting username string is then used to authenticate with the
RADIUS server.
■
userName —RADIUS username
■
domainName —Domain name
■
You may optionally supply password information:
■
passwordUsage —How the dynamic interface uses the password for
authentication purposes
■
password —Use the password as specified.
556 ■
Configuring IPoA Dynamic Interfaces
JUNOSe 11.1.x Link Layer Configuration Guide