Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 118 / 774

--------- --- --- --------- ------- ------------- --------- -------
ATM 2/1 0 100 5 5 5 5 Ping Completed
ATM 2/1 0 200 5 5 5 5 Ping Completed
ATM 2/2 0 100 5 5 5 5 Ping Completed
ATM 2/2 0 200 5 5 5 5 Ping Completed
% Found 4 Entries in the system
■
Example 2—Displays entries on an interface
host1# show atm ping 2/1
Interface VPI VCI CellCount TimeOut SentCellCount RespCount Status
--------- --- --- --------- ------- ------------- ---------- -------
ATM 2/1 0 100 5 5 5 5 Ping Completed
ATM 2/1 0 200 5 5 5 5 Ping Completed
% Found 2 Entries in this Interface
■
Example 3—Displays entries on a circuit
host1# show atm ping atm 2/1 0 100
Ping Cell Count :5
Ping Time Out :5secs
No Of Cells Sent :5
No Of Response Received :5
Success Rate :100%
round-trip min/max/avg :0/10/2 ms
Ping Status :Completed
Oam Flow Type :Segment
■
See show atm ping.
show atm subinterface
■
Use to display the current state of all ATM subinterfaces, all ATM subinterfaces
configured on a specified ATM physical interface, or a specific ATM subinterface.
■
To specify an ATM subinterface for ERX7xx models, ERX14xx models, and
ERX310 router, use the
slot / port . subinterface format.
■
slot —Number of the chassis slot
■
port —Port number on the I/O module
■
subinterface —Number of the subinterface in the range 1–2147483647
■
To specify an ATM subinterface for the E120 and E320 routers, use the
slot / adapter / port . subinterface format.
■
slot —Number of the chassis slot
■
adapter —Identifier for the IOA within the E320 chassis, either 0 or 1, where:
■
0 indicates that the IOA is installed in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
■
1 indicates that the IOA is installed in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
■
port —Port number on the IOA
■
subinterface —Number of the subinterface in the range 1–2147483647
86 ■
Monitoring ATM
JUNOSe 11.1.x Link Layer Configuration Guide