Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Руководство по настройке

Страница: 523 / 774

Setting Statistics Baselines
You can set a statistics baseline for a bridge group (by using the baseline bridge
command) or for a bridge interface (by using the baseline bridge interface
command).
baseline bridge
■
Use to set a statistics baseline for a specified bridge group.
■
The router implements the baseline by reading and storing the statistics at the
time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
■
Example
host1# baseline bridge westford03
■
There is no no version.
■
See baseline bridge.
baseline bridge interface
■
Use to set a statistics baseline for a particular network interface belonging to a
bridge group.
■
The router implements the baseline by reading and storing the statistics at the
time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
■
You must specify the following:
■
interfaceType —One of the following bridge interface types listed in Interface
Types and Specifiers in JUNOSe Command Reference Guide :
■
atm
■
fastEthernet
■
gigabitEthernet
■
tenGigabitEthernet
■
interfaceSpecifier —Particular interface; format varies according to interface
type; see Interface Types and Specifiers in JUNOSe Command Reference Guide
for information
■
Example
host1# baseline bridge interface atm 3/3.1
■
There is no no version.
■
See baseline bridge interface.
Monitoring Transparent Bridging
■ 491
Chapter 15: Configuring Transparent Bridging