Dell C9000 series, Справочное руководство

Страница: 125 / 2286

Example
Dell#show cpu-traffic-stats
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series
6.2.1.1 Introduced on the E-Series.
Usage Information Traffic statistics are sorted on a per-interface basis; the interface receiving the most
traffic is displayed first. All CPU and port information is displayed unless a specific port
or CPU is specified. Traffic information is displayed for router ports only; not for
management interfaces. The traffic statistics are collected only after the
debug cpu-
traffic-stats
command is executed; not from the system bootup.
NOTE: After debugging is complete, use the
no debug cpu-traffic-stats
command to shut off traffic statistics collection.
Example
Dell#show cpu-traffic-stats
Processor : CP
--------------
Received 100% traffic on fortyGigE 2/12 Total packets:8
LLC:0, SNAP:0, IP:5, ARP:0, other:3
Unicast:5, Multicast:3, Broadcast:0
Processor : RP
---------------
Received 100% traffic on fortyGigE 2/12 Total packets:168
LLC:0, SNAP:0, IP:165, ARP:0, other:3
Unicast:42, Multicast:126, Broadcast:0
Related
Commands debug cpu-traffic-stats — enables CPU traffic statistics for debugging.
Control and Monitoring 125