Dell C9000 series, Справочное руководство

Страница: 1362 / 2286

To remove the advertised dot3–tlv, use the
no advertise dot3–tlv power-via-
mdi
command
Parameters
power-via-mdi Enter the keyword
power—via-mdi
to advertise IEEE 802.3at
power-via-mdi TLV.
Defaults Disabled
Command Modes
• LLDP CONFIGURATION (conf-lldp)
• INTERFACE LLDP CONFIGURATION (conf-if-
interface -lldp)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information The
advertise dot3–tlv power—via—mdi
command enables the system to
advertise IEEE 802.3at power-via-mdi TLV to advertise its power negotiation
capabilities with the powered devices via Link Layer Discovery Protocol (LLDP). You can
configure this command either on a specific interface or globally.
Example
Dell(conf)#interface peGigE 0/0/0
Dell(conf-if-pegi-0/0/0)#protocol lldp
Dell(conf-if-pegi-0/0/0-lldp)#advertise dot3-tlv power-via-mdi
Dell(conf-if-pegi-0/0/0-lldp)#
advertise management-tlv
Advertise management TLVs (Type, Length, Value).
C9000 Series
Syntax
advertise management-tlv {management-address | system-capabilities
| system-description | system-name}
To remove advertised management TLVs, use the
no advertise management-tlv
{management-address | system-capabilities | system-description |
system-name}
command.
Parameters
management-
address Enter the keyword management-address to advertise the
management IP address TLVs to the LLDP peer.
Link Layer Discovery Protocol (LLDP) 1362