Dell C9000 series, Справочное руководство

Страница: 111 / 2286

pattern pattern (IPv4 only) Enter the IPv4 data pattern. Range: 0-FFFF. Default:
0xABCD .
sweep-min-size Enter the minimum size of datagram in sweep range. The range
is from 52 to 15359 bytes.
sweep-max-size Enter the maximum size of datagram in sweep range. The range
is from 53 to 15359 bytes.
sweep-interval Enter the incremental value for sweep size. The range is from 1
to 15308 seconds.
ointerface (IPv4 only) Enter the outgoing interface for multicast packets.
Enter the IP address in A.B.C.D format.
• For a Port Channel, enter the keyword
port-channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0
Introduced on the S4820T.
Added support for the
outgoing-interface
option for link-
local IPv6 addressing on the S4820T.
8.3.12.0 Added support for the
outgoing-interface
option for link-
local IPv6 addressing on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on the ExaScale.
8.4.1.0 IPv6 pinging available on management interface.
Control and Monitoring 111