Dell C9000 series, Справочное руководство

Страница: 1580 / 2286

To remove a static IPv6 entry from the IPv6 neighbor discovery, use the
no ipv6
neighbor ipv6–address {interface interface
Parameters
ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
interface
intehardware_rfac
e
Enter the keyword
interface
then the interface type and slot/
port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords
port-
channel
then a number.
• For a Null interface, enter the keyword null then the Null
interface number.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
• For a tunnel interface, enter the keyword
tunnel
then the
tunnel interface number. The range is from 1 to 16383.
• For a port extender Gigabit Ethernet interface, enter the
keyword
peGigE
then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48
hardware_address Enter a 48-bit hardware MAC address in nn:nn:nn:nn:nn:nn
format.
vrf vrf-name (Optional) Enter the keyword vrf and the name of the VRF to
install IPv6 routes in that VRF.
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Open Shortest Path First (OSPFv2 and OSPFv3) 1580