Dell C9000 series, Справочное руководство

Страница: 623 / 2286

To stop redistribution of OSPF routes, use the
no redistribute ospf process-id
command.
Parameters
process-id Enter the number of the OSPFv3 process. The range is 1 to
65535.
match external {1 |
2} (OPTIONAL) Enter the keywords
match external
to
redistribute OSPF external routes. You can specify 1 or 2 to
redistribute those routes only.
match internal (OPTIONAL) Enter the keywords
match internal
to
redistribute OSPFv3 internal routes only.
route-map map-
name
(OPTIONAL) Enter the keywords
route-map
followed by the
name of an established route map. Only the following ROUTE-
MAP mode commands are supported:
• match ipv6 address
• match ipv6 next-hop
• match ipv6 route-source
• set ipv6 next-hop
If you do not configure the route map, the default is
deny
(to
drop all routes).
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information When you enter the
redistribute ospf process-id
command without any other
parameters, the software redistributes all OSPF internal routes, external type 1 routes,
and external type 2 routes.
Border Gateway Protocol 623