Dell C9000 series, Справочное руководство

Страница: 1233 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information The following describes the
show ip traffic
summary shown in the following
example.
Keyword Definition
unknown
protocol... No receiver for these packets. Counts packets whose protocol
type field is not recognized by the system.
not a gateway... Packets can not be routed; the host/network is unreachable.
security failures... Counts the number of received unicast/multicast packets that
could not be forwarded due to:
• route not found for unicast/multicast; ingress interfaces do
not belong to the destination multicast group
• destination IP address belongs to reserved prefixes; the
host/network is unreachable
bad options... Unrecognized IP option on a received packet.
Frags: IP fragments received.
... reassembled Number of IP fragments that were reassembled.
... timeouts Number of times a timer expired on a reassembled queue.
... too big Number of invalid IP fragments received.
... couldn’t
fragment Number of packets that could not be fragmented and
forwarded.
...encapsulation
failed Counts packets which could not be forwarded due to ARP
resolution failure. The system sends an ARP request prior to
forwarding an IP packet. If a reply is not received, the system
repeats the request three times. These packets are counted in
encapsulation failed.
Rcvd: Total number of packets received from specified protocol.
IPv4 Routing 1233