Dell C9000 series, Справочное руководство

Страница: 1807 / 2286

Usage Information To access this command, enter the
class-map
command. After the class map is
identified, you can configure the match criteria.
The
match ip dscp
and
match ip precedence
commands are mutually exclusive.
Up to 64 IP DSCP values can be matched in one match statement. For example, to
indicate IP DCSP values 0 1 2 3 4 5 6 7, enter either the
match ip dscp
0,1,2,3,4,5,6,7
or
match ip dscp 0-7
command.
NOTE: Only one of the IP DSCP values must be a successful match criterion, not
all of the specified IP DSCP values must match.
Related
Commands class-map — identifies the class map.
match ip precedence
Use IP precedence values as a match criteria.
C9000 Series
Syntax
match {ip | ipv6 | ip-any} precedence ip- precedence-list [set-ip-
dscp value | set-color value ]
To remove IP precedence as a match criteria, use the
no match {ip | ipv6 | ip-
any} precedence ip- precedence-list [[multicast] set-ip-dscp value |
set-color value
command.
Parameters
ip Enter the keyword
ip
to support IPv4 traffic.
ipv6 Enter the keyword
ipv6
to support IPv6 traffic.
ip-any Enter the keyword
ip-any
to support IPv4 and IPv6 traffic.
ip-precedence-
list Enter the IP precedence value(s) as the match criteria. Separate
values by commas — no spaces ( 1,2,3 ) or indicate a list of
values separated by a hyphen (1-3). The range is from 0 to 7.
set-ip-dscp value (Optional) Enter the keywords
set-ip-dscp
then the IP DSCP
value. The matched traffic is marked with the DSCP value. The
range is from 0 to 63.
set-color value (Optional) Enter the keyword set-color followed by a color
value. Traffic that fulfills the match criteria is marked with the
color value that you specify. The default value is Yellow.
Defaults none
Command Modes CLASS-MAP CONFIGURATION (config-class-map)
Quality of Service (QoS) 1807